Safetor Coolstore Roof Anchors

Safetor is the home of the original height safety anchors.

Safetor Anchors are: "New Zealand's leading height safety Roof Anchor devices"

Safetor coolstore roof anchors meet all the following relevant performance and testing requirements of the AS/NZS Standards. AS/NZS 5532 : 2013, AS/NZS 1891.4: 2009, AS/NZS 1891.2: 2001, AS/NZS 4488.1 &
2: 1997 and performance requirements of the New Zealand Building Code


Safetor Coolstore Anchors:
 

1. Reduce loading on the structure if a fall occurs
2. Absorb energy without becoming brittle through stress loading or cold temperatures
3. Survive in the most severe environments without rusting or corroding
4. Repel water because of the powder coating we use, snow or ice won't stick to the anchor
5. Comply to all building codes and standards
6. Safetor Anchors exceed the testing mandate. This is well-proven and fully documented

Design
To Design a safe anchor product that works on cool store buildings, we at CCL worked in with Metalcraft Insulated Panels Systems Division to arrive at a suitable point of attachment. The Safetor Insulated Flat Panel Anchor (SPPA) is a new  shock absorbing fall protection anchor device, designed to protect both the worker and the building that it is attached to.


All Coolstore Anchor Sales & Installations                                                               

SPPA Safetor Insulated Flat Panel Anchor				SPP-TA Safetor Trapezoidal Panel Anchor
Click photo to view page				Click photo to view page
$336.30 + Gst + Freight				$465.50 + Gst + Freight
Approved by The Safetor Poly Panel height safety anchors are the only anchors fully tested by QSI to the AS/NZS 5532.2013 Standards and approved by Metalcraft for installation on Insulated Coolstore Panels. Warning: Only competent users who have received training should use this equipment. (Refer to the AS/NZS 1891.4:2009 recommendations concerning selection, use and maintenance.) Back to products