This High Profile anchor can be used for Fall-Arrest, Abseil and as an end anchor for lifelines.
Manufactured from 30mm Mild Steel solid bar with an overall height to suit purlins.
Mounting plate is 10mm thick Mild Steel with 2 x 18mm holes on either side of the main shaft.
Load reduction
The Safetor SE006L-HP anchor can reduce the loading on the structure to 3.8kN
Applications as per AS/NZS 1891.4:200 Standards: Strength Requirements for anchorages.
Ultimate Strength
End anchor for horizontal line - 44kN
1 person - Free Fall Arrest - 15kN
2 person - Free Fall Arrest - 21kN
1 Person - Limited Free Fall Arrest -12kN
NB:
1. Anchorage strength applicable when using a restraint
technique, is either 15kN or 12kN depending on whether
the ultimate fall is free-fall or limited free-fall.
2. 'Ultimate strength' means that the anchorage may
yield at the stated load but must not fail.
End anchor for horizontal line - 44kN
1 person - Free Fall Arrest - 15kN
2 person - Free Fall Arrest - 21kN
1 Person - Limited Free Fall Arrest -12kN
NB:
1. Anchorage strength applicable when using a restraint
technique, is either 15kN or 12kN depending on whether
the ultimate fall is free-fall or limited free-fall.
2. 'Ultimate strength' means that the anchorage may
yield at the stated load but must not fail.
Certification
The SE006L-HP Anchor has been fully tested to the AS/NZS 1891.4:2009 Standards by Material & Testing Laboratories.
Welding
All welding has been carried out by engineers that are certified
to ASME IX Standards.
Bolts
Bolts used to attach the anchors are M16mm Construction Bolts